3D nail sticker and acrylic

You need:
1. Nail art liner in “Black”
2. Colour mixed pallet
3. Sponge
4. Acrylic in blue
5. Acrylic in white
6. Acrylic in brown
7. Clear nail lacquer
8. Self-adhesive 3D Nail Sticker
9. Tweezers

Tip:
We recommend to begin with the thumb, because it has a larger working surface.

Step 1: You need the acrylic colours, the colour mixed pallet an a paper napkin
Use a colour mixed pallet or something else.

Put some of the blue acrylic on the colour mixed pallet.

Put some of the white acrylic on the colour mixed pallet beside the blue colour.

Now put displaced to the blue and white colour some of the brown acrylic on the colour mixed pallet.

The arrangement of the three acrylic on the colour mixed pallet should correspond approximately to the picture.

Now put a paper napkin or something else beside the colour mixed pallet.

Step 2: You need a small sponge
Now use a small sponge.

Press the tip of the small sponge on the center of the blue and white acrylic.

Now press the tip of the small sponge on the paper napkin.

Make sure that the two acrylic are visible at the tip of the small sponge.

Note:
You have to continue with step 3, before the acrylic are dried.

Step 3: You need the small sponge with the acrylic
Hold the small sponge in such a way that the blue acrylic lies on the lower side.

Begin on the left side of your fingernail. Set the small sponge on the left side and press it firmly on your fingernail.

Now turn the small sponge in such a way that the white acrylic is on the upper side.

Now set the smal sponge on the center of the fingernail tip and press it firmly on your fingernail.

Now turn the small sponge in such a way that the blue acrylic is on the upper side.

Now set the corner of the small sponge left on the edge of the fingernail and press it firmly on your fingernail.

Now turn the small sponge in such a way that the white acrylic is on the upper side.

Now set the corner of the small sponge right on the fingernail tip and press it firmly on your fingernail.

Turn the small sponge in such a way that the blue acrylic is on the upper side. Now set the blue corner of the small sponge right on the fingernail tip and press it firmly on your fingernail.

Now set the blue corner of the small sponge left on the fingernail tip and press it firmly on your fingernail.

Turn the small sponge in such a way that the white acrylic is on the upper side. Now set the white corner of the small sponge left on the fingernail tip and press it firmly on your fingernail.

Turn the small sponge in such a way that the blue acrylic is on the upper side. Now set the blue corner of the small sponge on the center and press it firmly on your fingernail.

Turn the small sponge in such a way that the white acrylic is on the upper side. Now set the white corner of the small sponge on the right fingernail edge and press it firmly on your fingernail.

The motif with 3D nail sticker and acrylic should correspond approximately to the picture.

Step 4: You need the small sponge
Now use the back of the small sponge.

Press the corner of the small sponge into the brown acrylic.

Step 5: You need the small sponge with the acrylic
Hold the small sponge in such a way that the brown acrylic lies on the upper side.

Set the small sponge on the left fingernail edge and press it firmly on your fingernail.

Tip:
If you have synthetic fingernails you should pay attention, that the edge of the fingernail is also painted. This causes a perfect and consistent look of your fingernail.

The motif with 3D nail sticker and acrylic should correspond approximately to the picture.

Note:
Before you continue with step 6, wait until the acrylic on the fingernail are dried.

Step 6: You need the self-adhesive 3D nail sticker and the tweezers
Take up with the tweezers a 3D nail sticker in the form of a palm and set it on the brown acrylic.

Now press with the tweezers the 3D nail sticker firmly to the nail surface.

Take up with the tweezers a 3D nail sticker in the form of a dolphin and set it on the free nail surface.

Now press with the tweezers the 3D nail sticker firmly to the nail surface.

The motif with 3D nail sticker and acrylic should correspond approximately to the picture.

Step 7: You need the nail art liner in the colour black
Draw an easily swung short line under the upper edge of the fingernail.

Now draw to the line, which you have drawn before a further easily swung short line.

The motif with 3D nail sticker and acrylic should correspond approximately to the picture.

Note:
Before you continue with the last step, wait until the nail lacquer on the fingernail is dried.

Step 8: You need the clear nail lacquer
At the last step you have to paint over the entire fingernail with a clear nail lacquer.

The clear nail lacquer protects the nail art and gives the fingernail more gloss.

After the clear nail lacquer is dried, the nail art motif with 3D nail sticker and acrylic is finished.